Essay Topics
Types of Essays
Essay Checklist
Word Counter
Readability Score
Essay Rewriter
Some people may be annoyed by their car wearing out. Kids may have trouble with rust forming on their bicycles. One may think how to prevent rusting, but do one knows what is happening when a metal corrode? Corrosion is defined as the involuntary destruction of substances such as metals and mineral building material by surrounding media, which are usually liquid (i.e. corrosive agents). Most metals corrode. During corrosion, they change into metallic ions. In some cases, the product of corrosion itself forms a protective coating. For example, aluminium forms a thin protective oxide layer which is impervious to air and water. In other cases (e.g. iron), however, the coating either flakes off or is pervious to both air and water. So the whole piece of metal can corrode right through. The most common forms of metallic corrosion are caused by electrochemical reactions, wherein two metallic phases (e.g., iron oxide and iron) react in the presence of electrolytic solution. Another mechanism of metallic corrosion is caused by chemical reaction, which explains how the protective layer of the metal is formed. Rusting is the corrosion of iron which is the most widely used structural metal. Most of it is used in making steel. The wide range of products made from steel includes all types of vehicles, machinery, pipelines, bridges, and reinforcing rods and girders for construction purposes. Therefore, rusting causes enormous economic problem and is the reason why extensive measures of corrosion protection have had to be developed. The economic importance of corrosion and corrosion protection can be shown by the following example: It is estimated that roughly 3% of the annual production of steel is lost by corrosion. In 1974, 140 millions tons of steel were produced in the United States at a cost of approximately $400 per tons. So this gives a monetary loss of about 1.7 billion dollars. It is clearly of the utmost importance to reduce as far as possible the financial loss by corrosion, which not only affects steel but to the extent all other building metal as well. It is obvious that corrosion and rusting affect significantly the life of the society, so it is worthy to investigate this topic. In this essay, the cause of the corrosion and rusting and consequently the protection of the corrosion will be explored. Electrochemical corrosion reactions This type of corrosion takes place when two metallic phases with different electrochemical potentials are connected to each other by means of an electric conductor. Electrolytes such as acids, alkalis, salt solutions, or even milder media (e.g., rainwater, river water, groundwater, or tap water) also need to be present. Metallic phases with different electrochemical potentials exhibit electric potential differences. Potential differences may also arise because of impurities, internal stresses, corrosion products, damaged protective coatings, etc. They also occur when different metals are used. The larger the potential difference, the faster the rate of corrosion.
Essay Writing Checklist
The following guidelines are designed to give students a checklist to use, whether they are revising individually or as part of a peer review team.
Introduction
  • Is the main idea (i.e., the writer's opinion of the story title) stated clearly?
  • Is the introductory paragraph interesting? Does it make the reader want to keep on reading?
Body Paragraph
  • Does each body paragraph have a clear topic sentence that is related to the main idea of the essay?
  • Does each body paragraph include specific information from the text(including quoted evidence from the text, if required by the instructor)that supports the topic sentence?
  • Is there a clear plan for the order of the body paragraphs (i.e., order of importance, chronology in the story, etc.)?
  • Does each body paragraph transition smoothly to the next?
Conclusion
  • Is the main idea of the essay restated in different words?
  • Are the supporting ideas summarized succinctly and clearly?
  • Is the concluding paragraph interesting? Does it leave an impression on the reader?
Overall Essay
  • Is any important material left unsaid?
  • Is any material repetitious and unnecessary?
  • Has the writer tried to incorporate "voice" in the essay so that it has his/her distinctive mark?
  • Are there changes needed in word choice, sentence length and structure, etc.?
  • Are the quotations (if required) properly cited?
  • Has the essay been proofread for spelling, punctuation, grammar, etc.?
  • Does the essay have an interesting and appropriate title?
Essay Analysis of the Corrosion and Rusting in Chemistryon Organic Chemistry
Trending Essay Topics
Reference
Feel free to use content on this page for your website, blog or paper we only ask that you reference content back to us. Use the following code to link this page:
Terms · Privacy · Contact
Essay Topics © 2019

Essay Analysis Of The Corrosion And Rusting In Chemistryon Organic Chemistry

Words: 481    Pages: 2    Paragraphs: 8    Sentences: 38    Read Time: 01:44
Highlight Text to add correction. Use an editor to spell check essay.
              Some people may be annoyed by their car wearing out. Kids may have trouble with rust forming on their bicycles. One may think how to prevent rusting, but do one knows what is happening when a metal corrode?
             
              Corrosion is defined as the involuntary destruction of substances such as metals and mineral building material by surrounding media, which are usually liquid (i. e. corrosive agents). Most metals corrode. During corrosion, they change into metallic ions. In some cases, the product of corrosion itself forms a protective coating. For example, aluminium forms a thin protective oxide layer which is impervious to air and water. In other cases (e. g. iron), however, the coating either flakes off or is pervious to both air and water. So the whole piece of metal can corrode right through.
             
              The most common forms of metallic corrosion are caused by electrochemical reactions, wherein two metallic phases (e. g. , iron oxide and iron) react in the presence of electrolytic solution. Another mechanism of metallic corrosion is caused by chemical reaction, which explains how the protective layer of the metal is formed.
             
              Rusting is the corrosion of iron which is the most widely used structural metal. Most of it is used in making steel. The wide range of products made from steel includes all types of vehicles, machinery, pipelines, bridges, and reinforcing rods and girders for construction purposes. Therefore, rusting causes enormous economic problem and is the reason why extensive measures of corrosion protection have had to be developed.
             
              The economic importance of corrosion and corrosion protection can be shown by the following example: It is estimated that roughly 3% of the annual production of steel is lost by corrosion. In 1974, 140 millions tons of steel were produced in the United States at a cost of approximately $400 per tons. So this gives a monetary loss of about 1. 7 billion dollars. It is clearly of the utmost importance to reduce as far as possible the financial loss by corrosion, which not only affects steel but to the extent all other building metal as well.
              It is obvious that corrosion and rusting affect significantly the life of the society, so it is worthy to investigate this topic. In this essay, the cause of the corrosion and rusting and consequently the protection of the corrosion will be explored.
             
              Electrochemical corrosion reactions
             
              This type of corrosion takes place when two metallic phases with different electrochemical potentials are connected to each other by means of an electric conductor.
             
              Electrolytes such as acids, alkalis, salt solutions, or even milder media (e. g. , rainwater, river water, groundwater, or tap water) also need to be present. Metallic phases with different electrochemical potentials exhibit electric potential differences. Potential differences may also arise because of impurities, internal stresses, corrosion products, damaged protective coatings, etc. They also occur when different metals are used. The larger the potential difference, the faster the rate of corrosion.
Chemistry Essay 
Tip: Use our Essay Rewriter to rewrite this essay and remove plagiarism.

Add Notes

Have suggestions, comments or ideas? Please share below. Don't forget to tag a friend or classmate.
clear
Formatting Help
Submit
Sitemap